Product Categories

Netherlands ASI Photon Counting Hybrid Pixel X-ray Detector

The LynX series detectors produced by ASI company are hybrid pixel area detectors with a 55μm pixel pitch, offering a wide range of applications. In each 512×512 pixel (262K pixels), the LynX detector's ability to distinguish or measure X-ray energy provides unprecedented possibilities for applications such as X-ray detection, imaging, and tomography. LynX sensors (silicon, gallium arsenide, cadmium telluride) are designed as a pixel array and connected via bump-bonds to the readout circuitry integrated into the chip beneath the sensor, converting the sensor's signal into an electrical signal. Each pixel is capable of performing metrology on the object under test, counting photon energy, or calculating the time of detected quanta.

Consultation Hotline:

Product Details

LynX Series Hybrid Pixel X-ray Detectors

ASI's LynX series detectors are hybrid pixel area detectors with a 55μm pixel pitch and a wide range of applications. Within each 512×512 pixel (262K pixels), the LynX detector's ability to discriminate or measure X-ray energy provides unprecedented possibilities for X-ray detection, imaging, and tomography applications. LynX sensors (silicon, gallium arsenide, cadmium telluride) are designed as a pixel array and connected via bump bonds to the readout circuitry of the chip integrated below the sensor, converting the sensor's signal into an electrical signal. Each pixel can perform measurements of the object under test, statistically count photon energy, or calculate the time at which the quantum is detected.

LynX 120 is a multi-functional photon-counting detector based on the Timepix ASIC (Application-Specific Integrated Circuit). Each pixel either counts detected events, measures the energy deposited in the pixel, or measures the arrival time of the detected photons. The readout rate is up to 120 frames/second.

LynX 1800 is based on the Medipix3RX ASIC and has improved speed. In continuous readout mode, it can record up to 1800 frames/second with zero dead time. In charge summing mode, spectral performance is improved, avoiding energy loss due to charge sharing between pixels.

Additionally, LynX 1800s, also based on Medipix3RX but with a 110μm bump layout, is available. In charge summing mode, it has 4 energy thresholds, allowing the counting of X-rays in different energy windows in a single measurement.

LynX T3 is a high-speed detector based on Timepix 3 with nanosecond photon timestamps, with a time resolution of up to 1.6 nanoseconds.

Hybrid Pixel Technology Features

    Direct, single-photon detection

Superior point spread function

Zero noise, high signal-to-noise ratio, and wide dynamic range

Short readout time and high frame scan rate

Modular detector, larger active area

Optional high-Z sensor materials for improved high-energy efficiency

Main Applications

Phase contrast imaging (ptychography, grating interferometry)

Scanning SAXS/WAXS imaging, small-angle X-ray scattering

Surface diffraction

Time-resolved experiments

X-ray and medical imaging

Macromolecular crystallography

Tomography

Energy-resolved X-rays

Computed tomography

High-speed production line X-ray inspection

Electron microscopy

Mass spectrometry

Sensor Specifications

Sensor: 300 μm Si (standard)

500 μm GaAs

1000μm CdTe

 

 

Model and Configuration

(***)Various pixel sizes are available

 

ASI products also include the TPX3Cam, a fast optical camera for photon timestamping; it is based on a new type of silicon pixel sensor and combines Timepix3 ASIC and readout chip technology, suitable for various applications requiring time-resolved imaging such as electrons, ions, or single photons; see TPX3Cam fast optical detector for nanosecond photon timestamping 。 ASI's Chee-tah series is a hybrid pixel detector (TEM ED Detector Camera) suitable for electron microscopy applications; Chee-tah's excellent sensitivity and speed provide unprecedented possibilities for electron diffraction, imaging, and tomography, often used in diffraction experiments; Chee-tah's high speed makes it an ideal tool for observing dynamic processes and capturing rapidly decaying signals; see Chee-tah series hybrid pixel detectors 。

It has a Class II qualification for steel structure engineering professional contracting and a Class II qualification for general contracting of building engineering construction; the company's main products include heavy steel, light steel, trusses and purlins, color steel plates and other steel structure products; in recent years, the company has undertaken a series of projects with significant influence, including large-scale structural components, bridges, garages, and standardized factories at home and abroad; products are exported to Belarus, Zambia, Indonesia and other countries, and have been well received.

Keywords: Netherlands ASI Photon Counting Hybrid Pixel X-ray Detector

Product Consultation

We will contact you within one working day. Please pay attention to your email.

%{tishi_zhanwei}%