Product Categories
Tousimis C-series touchscreen fully automatic critical point dryer for wafers_CPD
Category:
Product Details
US Tousimis C-series Touchscreen Fully Automatic Critical Point Dryer
_Wafer-specific CPD (Cleanroom Version)
The C-series are vertical (floor-standing) large critical point dryers, capable of working in cleanrooms, with 3 models available:
1) Autosamdri-934, for supercritical drying of wafers up to 4"
2) Automegasamdri-936, for supercritical drying of wafers up to 6"
3) Automegasamdri-938, for supercritical drying of wafers up to 8"
Critical Point Drying Principle
It is called critical point drying (also known as supercritical drying) because there is a continuity of states, meaning there is no clear distinction between the liquid and gaseous phases of the medium, and the surface tension of the interface drops to zero. This phenomenon has specific temperature and pressure conditions, known as the critical point. This zero surface tension condition can be used to dry biological samples or water-containing material samples, avoiding damage to the samples caused by surface tension.
When preparing biological samples or water-containing material samples for electron microscopy (SEM/TEM), dehydration (gradient dehydration) is often required. However, the critical point of water is +374℃ and 3212 psi, which is very inconvenient and prone to damaging the sample. Usually, a very convenient critical point drying medium is CO2, with its critical point at +31℃ and 1072 psi. However, it does not mix easily with water, so a third medium must be used, typically ethanol or acetone as an intermediate liquid. This way, when the transition liquid, CO2, turns from liquid to gas, there is no surface tension damage to the sample at the critical point.
Features and Benefits
❖ Dedicated initial slow fill to the working chamber, ideal hydrodynamics protect sensitive micro-devices
❖ Chamber illumination through observation window facilitates visualization of chamber status
❖ Touchscreen control, factory default fully automatic processing programs or custom user programs
❖ Internal surface material durable for CO 2, ultrapure ethanol and acetone environment
❖ Externally mounted components like Post-Purge-Filter make maintenance easy
❖ Exclusive 'Spiral Vortex' method generates hydrodynamic exchange, eliminating the need for mechanical stirring devices to accelerate displacement
❖ Extremely efficient integrated closed cooling circuit rapidly lowers chamber temperature, shortening processing time
❖ Working chamber provides particle filtration of liquid carbon dioxide down to 0.08µm, with particle retention reaching 99.999%+
❖ Anti-static design, suitable for cleanroom material manufacturing applications
❖ Innovative chamber fill blocks allow for changes in chamber internal diameter, maximizing liquid carbon dioxide utilization, reducing process time, and providing multi-size wafer processing capability
❖ Processes up to 5 wafers at a time. Configurable with different HF-compatible wafer holders depending on the model: 8", 6", 4", 3", 2", and 10mm die holders
❖ Repeatable operating parameters ensure result 'reproducibility'
❖ Integrated temperature and pressure automatic adjustment safety operation function
❖ Built-in condenser separates waste ethanol and carbon dioxide, eliminating any pipeline freezing or body static, and the entire process is noiseless
Main Technical Specifications
➢ Working Chamber Dimensions: Model 934 4.50"I.D.; Model 936 6.50"I.D.; Model 938 8.50"I.D.
➢ Pressure Measurement Range: 0-2000psi.
➢ Temperature Measurement Range: -30°C to 60°C
➢ Control Method: Touchscreen Fully Automatic Program Control
Standard Configuration
✓ Flexible high-pressure liquid CO2 supply hose for easy on-site installation
✓ Dual T-filter assembly (#8785) pre-installed on the liquid carbon dioxide high-pressure hose on the chamber
✓ All exhaust ports include static-free exhaust tubes
✓ Chamber inserts include: 8" to 6", 6" to 4", 4" to 3", 3" to 2", 2" to 1.25", configured according to different models! Allows drying of multiple wafer sizes
✓ Equipped with fluorine-resistant sample holders, configured according to different chamber sizes for drying 8", 6", 4", 3", 2" wafers or 10mm square bare chips, each holder can load up to five wafers
✓ Spare chamber O-rings, chamber lamp, and fuses (3A and 8A)
Note : US Tousimis products have a history of nearly 50 years and are highly reputable among Chinese customers. 覃思科技 is its authorized distributor for CPD supercritical dryers in China. Tousimis critical point dryer products are divided into two main categories: non-cleanroom versions and cleanroom versions. The former is often used for EM sample preparation, while the latter is mostly used for material research in cleanrooms;
There are 7 non-cleanroom versions of CPD:
1) Samdri®-PVT-3D Conventional Critical Point Dryer
2) Samdri®-795 Semi-automatic Critical Point Dryer
3) Autosamdri®-815 Series A Fully Automatic Critical Point Dryer
4) Autosamdri®-815B Series A Fully Automatic Critical Point Dryer
5)Autosamdri®-931_1.25" Touchscreen Fully Automatic Critical Point Dryer
6)Autosamdri®-931_2.50" Touchscreen Fully Automatic Critical Point Dryer
7)Autosamdri®-931_3.40" Touchscreen Fully Automatic Critical Point Dryer
There are 9 CPDs in the cleanroom version:
1)Autosamdri®-815 Series B Fully Automatic Critical Point Dryer For Die & 1" Wafers
2)Autosamdri®-815B Series B Fully Automatic Critical Point Dryer For 4" Wafers
3)Automegasamdri®-915B, Series B Fully Automatic Critical Point Dryer For 6" Wafers
4)Autosamdri®-931_1.25" Touchscreen Fully Automatic Multipurpose Critical Point Dryer
5)Autosamdri®-931_2.50" Touchscreen Fully Automatic Multipurpose Critical Point Dryer
6)Autosamdri®-931_3.40" Touchscreen Multipurpose Fully Automatic Critical Point Dryer
7)Autosamdri®-934 Touchscreen C Series Fully Automatic Critical Point Dryer
8)Automegasamdri®-936 Touchscreen C Series Fully Automatic Critical Point Dryer
9)Automegasamdri®-938 Touchscreen C Series Fully Automatic Critical Point Dryer
Tousimis supercritical dryers from the United States are widely used for biological samples, gels and other fragile and complex samples with micro-nano 3D structures, as well as materials such as MEMS, MOFs, carbon nanotubes, graphene, and semiconductor wafers (maximum sample size 8 inches, 5 pieces dried simultaneously) critical point drying. Using the principle of CO2 critical point state without liquid phase surface tension causing sample shrinkage and deformation to obtain dried samples with true morphology, it is an effective method for drying and sample preparation of biological samples such as cells and tissues containing water or other liquids, and semiconductor material samples; it is characterized by simple operation, precise control, and repeatable results. Among them, the classic SAMDRI®-PVT-3D and the award-winning Autosamdri®-931 advanced touchscreen fully automatic CPD models are particularly noteworthy. Customers can choose different models based on different applications.
It has a Class II qualification for steel structure engineering professional contracting and a Class II qualification for general contracting of building engineering construction; the company's main products include heavy steel, light steel, trusses and purlins, color steel plates and other steel structure products; in recent years, the company has undertaken a series of projects with significant influence, including large-scale structural components, bridges, garages, and standardized factories at home and abroad; products are exported to Belarus, Zambia, Indonesia and other countries, and have been well received.
Keywords: Tousimis C-series touchscreen fully automatic critical point dryer for wafers_CPD
Related Products
Product Consultation
We will contact you within one working day. Please pay attention to your email.