Product Categories

Tousimis AUTOSAMDRI-931 Touchscreen Fully Automatic Critical Point Dryer

The Tousimis supercritical dryer from the United States is widely used for critical point drying of biological samples, gels, and other fragile and complex samples with micro-nano 3D structures, as well as materials such as MEMS, MOFs, carbon nanotubes, graphene, and semiconductor wafers (maximum sample size 8 inches, 5 pieces can be dried simultaneously). It utilizes the principle of CO2's critical point state, where the absence of liquid-phase surface tension prevents sample shrinkage and deformation, resulting in dried samples with true morphology. This is an effective method for drying and preparing samples of hydrated or other liquid-containing biological samples such as cells and tissues, and materials such as semiconductors. It features easy operation, precise control, and repeatable results. The Autosamdri-931 advanced touchscreen fully automatic CPD features a unique stirring method that accelerates replacement while avoiding sample disturbance and facilitates maintenance. Using "Stasis software", it allows for complete replacement of ethanol with liquid CO2 during the processing of difficult samples, suitable for critical point drying preparation of gels and other complex samples.

Consultation Hotline:

Product Details

AUTOSAMDRI-931 Non-Cleanroom Series CPD

New Generation Touchscreen Fully Automatic Critical Point Dryer

 

Critical Point Drying Principle
It is called critical point drying (also known as supercritical drying) because of the continuity of its state, that is, there is no obvious difference between the liquid and gaseous states of the medium, and the surface tension of the interface drops to zero. This phenomenon has a specific temperature and pressure, called the critical point. This condition of zero surface tension can be used to dry biological samples or water-containing material samples, avoiding damage to the samples caused by surface tension.
When preparing biological samples or water-containing material samples for electron microscopy (scanning electron microscopy and transmission electron microscopy), we often need to perform dehydration (gradient dehydration), but the critical point of water is +374℃ and 3212 psi, which is inconvenient and easily damages the samples. A commonly used critical point drying medium is CO2, which has a critical point of +31℃ and 1072 psi. However, it does not mix easily with water, so a third medium, usually ethanol or acetone, must be used as an intermediate liquid. In this way, when the transition liquid, i.e., CO2, changes from liquid to gas, there is no surface tension damage to the sample at the critical point.

 

Features and Advantages

❖ Touchscreen control

❖ Use factory settings or create custom recipes

❖ “Slow fill” control for extremely fragile samples

❖ Internal particle filtration

❖ Rapid cooling chamber (approximately 1 minute for a 1.25" working chamber)

❖ Illuminated working chamber for precise observation of the liquid level

❖ Unique stirring method, accelerating replacement while avoiding sample disturbance, easy to maintain

❖ “Stasis software” allows for complete displacement of ethanol with liquid CO2 during difficult sample processing, suitable for gels and other complex samples

❖ Equipped with a condenser to separate waste ethanol and carbon dioxide, eliminating electrostatic discharge and freeze-up during exhaust, and eliminating noise during replacement and exhaust

❖ Compact chassis

 

Main Technical Specifications

➢ Working chamber size: Three chamber diameters are available: 1.25", 2.50", 3.40"

➢ Pressure measurement range: 0-2000psi.

➢ Temperature measurement range: -30°C to 60°C

➢ Control method: Touchscreen fully automatic program control

 

Standard Configuration

✓ Flexible high-pressure liquid CO2 supply hose for easy on-site installation

✓ Liquid CO2 system delivery filtration

✓ Flexible exhaust hose for easy installation

✓ Spare chamber O-rings, chamber lamp and fuses

 

Note: Tousimis products from the United States have a history of nearly 50 years and enjoy a very good reputation among Chinese customers. Qinsi Technology is the Chinese agent for its CPD supercritical dryers. Tousimis critical point drying instruments are divided into two categories: non-cleanroom versions and cleanroom versions. The former is often used for electron microscopy sample preparation, while the latter is mostly used for material research in ultra-clean rooms;

There are 7 non-cleanroom CPD models:

1) Samdri®-PVT-3D Conventional Critical Point Dryer

2) Samdri®-795 Semi-automatic Critical Point Dryer

3) Autosamdri®-815 Series A Fully Automatic Critical Point Dryer

4) Autosamdri®-815B Series A Fully Automatic Critical Point Dryer

5) Autosamdri®-931_1.25" Touchscreen Fully Automatic Critical Point Dryer

6) Autosamdri®-931_2.50" Touchscreen Fully Automatic Critical Point Dryer

7) Autosamdri®-931_3.40" Touchscreen Fully Automatic Critical Point Dryer

There are 9 cleanroom CPD models:

1) Autosamdri®-815 Series B Fully Automatic Critical Point Dryer For Die & 1" Wafers

2) Autosamdri®-815B Series B Fully Automatic Critical Point Dryer For 4" Wafers

3) Automegasamdri®-915B, Series B Fully Automatic Critical Point Dryer For 6" Wafers

4) Autosamdri®-931_1.25" Touchscreen Fully Automatic Multipurpose Critical Point Dryer

5) Autosamdri®-931_2.50" Touchscreen Fully Automatic Multipurpose Critical Point Dryer

6) Autosamdri®-931_3.40" Touchscreen Fully Automatic Multipurpose Critical Point Dryer

7) Autosamdri®-934 Touchscreen C Series Fully Automatic Critical Point Dryer

8) Automegasamdri®-936 Touchscreen C Series Fully Automatic Critical Point Dryer

9) Automegasamdri®-938 Touchscreen C Series Fully Automatic Critical Point Dryer

The Tousimis supercritical dryer from the USA is widely applicable for critical point drying of fragile and complex samples with micro-nano 3D structures, such as biological samples, gels, and material samples like MEMS, MOF, carbon nanotubes, graphene, and semiconductor wafers (maximum sample size 8 inches, 5 pieces can be dried simultaneously). It utilizes the principle that CO2 at its critical point state has no liquid-phase surface tension, preventing sample shrinkage and deformation, thereby obtaining dried samples with true morphology. This is an effective method for drying and preparing biological samples like hydrated cell tissues and material samples like semiconductors. It features simple operation, precise control, and repeatable results. Among them, the classic SAMDRI®-PVT-3D and the award-winning Autosamdri®-931 advanced touchscreen fully automatic CPD models are particularly noteworthy. Customers can choose different models based on different applications.

It has a Class II qualification for steel structure engineering professional contracting and a Class II qualification for general contracting of building engineering construction; the company's main products include heavy steel, light steel, trusses and purlins, color steel plates and other steel structure products; in recent years, the company has undertaken a series of projects with significant influence, including large-scale structural components, bridges, garages, and standardized factories at home and abroad; products are exported to Belarus, Zambia, Indonesia and other countries, and have been well received.

Keywords: Tousimis AUTOSAMDRI-931 Touchscreen Fully Automatic Critical Point Dryer

Product Consultation

We will contact you within one working day. Please pay attention to your email.

%{tishi_zhanwei}%