Product Categories
Tousimis_SAMDRI-PVT-3D supercritical dryer, USA
Category:
Product Details
Tousimis SAMDRI-PVT-3D Supercritical Dryer
Advanced electron microscopy sample preparation equipment, conventional critical point dryer
Critical Point Drying Principle
It is called critical point drying (also known as supercritical drying) because of the continuity of its state, that is, there is no obvious difference between the liquid and gaseous states of the medium, and the surface tension of the interface is reduced to zero. This phenomenon has a specific temperature and pressure, called the critical point. This condition of zero surface tension can be used to dry biological samples or aqueous material samples, avoiding damage to the samples caused by surface tension.
When preparing biological samples or aqueous material samples for electron microscopy (scanning electron microscopy SEM, transmission electron microscopy TEM), we often need to perform dehydration (gradient dehydration), but the critical point of water is +374℃ and 3212 psi, which is inconvenient and easily damages the sample. A commonly used and convenient critical point drying medium is CO2, whose critical point is +31℃ and 1072 psi. However, it does not mix easily with water, so a third medium must be used, usually ethanol or acetone as an intermediate liquid. In this way, when the transition liquid, i.e., CO2, changes from liquid to gas, there is no surface tension damage to the sample at the critical point.
Features and Advantages
❖ Compact tabletop device, small footprint
❖ Precise flow control through micro-flow valves, vernier scale supports repeatable flow settings
❖ Convenient top-loading work chamber
❖ With a viewing window to observe the internal state of the chamber
❖ Equipped with a particle filter to protect samples and valves
❖ Internal surface material is resistant to liquid CO2 and ultrapure ethanol environments
❖ Automatic critical point temperature-pressure regulation to ensure system safety
❖ Rapid cooling chamber (approximately 1 minute at room temperature)
❖ Optional condenser to collect waste ethanol and eliminate noise during displacement discharge
Main Technical Specifications
➢ Working chamber diameter: 1.25" I.D.
➢ Temperature measurement range: -30 °C to 60 °C
➢ Pressure measurement range: 0 to 2,000 psi.
➢ Temperature control method: Fully automatic temperature and pressure control
➢ Venting method: Precise control by micro-flow valve
Standard Configuration
✓ Flexible braided stainless steel high-pressure tubing for conveying liquid CO2
✓ External liquid CO2 filtration system to remove water/oil and small particles
✓ Exhaust pipe for exhaust during PURGE/VENT/BLEED and COOL
✓ Spare chamber O-rings, chamber lamp and fuses
Note: Tousimis products from the United States have a history of nearly 50 years and enjoy a very good reputation among Chinese customers. Qinsi Technology is the Chinese agent for its CPD supercritical dryer. Tousimis critical point drying instruments are divided into two categories: non-cleanroom versions and cleanroom versions. The former is often used for electron microscopy sample preparation, while the latter is mostly used for material research in ultra-clean rooms.
There are 7 CPD models in the non-cleanroom version:
1) Samdri®-PVT-3D Conventional Critical Point Dryer
2) Samdri®-795 Semi-automatic Critical Point Dryer
3) Autosamdri®-815 Series A Fully Automatic Critical Point Dryer
4) Autosamdri®-815B Series A Fully Automatic Critical Point Dryer
5) Autosamdri®-931_1.25" Touchscreen Fully Automatic Critical Point Dryer
6) Autosamdri®-931_2.50" Touchscreen Fully Automatic Critical Point Dryer
7) Autosamdri®-931_3.40" Touchscreen Fully Automatic Critical Point Dryer
There are 9 CPD models in the cleanroom version:
1) Autosamdri®-815 Series B Fully Automatic Critical Point Dryer For Die & 1" Wafers
2) Autosamdri®-815B Series B Fully Automatic Critical Point Dryer For 4" Wafers
3) Automegasamdri®-915B, Series B Fully Automatic Critical Point Dryer For 6" Wafers
4) Autosamdri®-931_1.25" Touchscreen Fully Automatic Multipurpose Critical Point Dryer
5) Autosamdri®-931_2.50" Touchscreen Fully Automatic Multipurpose Critical Point Dryer
6) Autosamdri®-931_3.40" Touchscreen Fully Automatic Multipurpose Critical Point Dryer
7) Autosamdri®-934 Touchscreen C Series Fully Automatic Critical Point Dryer For 4" Wafers
8) Automegasamdri®-936 Touchscreen C Series Fully Automatic Critical Point Dryer For 6" Wafers
9) Automegasamdri®-938 Touchscreen C Series Fully Automatic Critical Point Dryer For 8" Wafers
The Tousimis supercritical dryer from the United States is widely used for biological samples, gels, and other fragile and complex samples with micro-nano 3D structures, as well as materials such as MEMS, MOFs, carbon nanotubes, graphene, and semiconductor wafers (maximum sample size 8 inches, 5 pieces can be dried simultaneously) for critical point drying. Utilizing the principle of CO2's critical point state eliminating liquid-phase surface tension-induced sample shrinkage and deformation, it obtains dried samples with true morphology. This is an effective method for drying and preparing samples of hydrated or other liquid-containing cells, tissues, and other biological samples, as well as semiconductor materials; it features ease of operation, precise control, and repeatable results. Among them, the classic SAMDRI®-PVT-3D and the award-winning Autosamdri®-931 advanced touchscreen fully automatic CPD models are particularly noteworthy. Customers can choose different models based on different applications.
It has a Class II qualification for steel structure engineering professional contracting and a Class II qualification for general contracting of building engineering construction; the company's main products include heavy steel, light steel, trusses and purlins, color steel plates and other steel structure products; in recent years, the company has undertaken a series of projects with significant influence, including large-scale structural components, bridges, garages, and standardized factories at home and abroad; products are exported to Belarus, Zambia, Indonesia and other countries, and have been well received.
Keywords: Tousimis_SAMDRI-PVT-3D supercritical dryer, USA
Related Products
Product Consultation
We will contact you within one working day. Please pay attention to your email.