Product Categories
Electrochemical Impedance Spectroscopy (EIS) GeoApp
Category:
Product Details
GeoDict Electrochemical Impedance Spectroscopy (EIS) GeoApp
The EIS GeoApp is a specialized GeoDict tool for battery R&D, enabling impedance spectroscopy simulations directly on battery microstructures. Since EIS and charge/discharge simulations share the same physics‑based model, users can consistently analyze impedance behavior, interpret experimental data, and calibrate charge simulation parameters.
With this GeoApp, users can simulate EIS on digital battery and electrode models, set double‑layer capacitance for anode and cathode, automatically run BatteryDict impedance simulations, compare full‑cell and individual electrode responses, output Nyquist and Bode plots, and link microstructure with electrochemical performance.
From Equivalent Circuit Fitting to Physics‑Based Simulation
Conventional EIS analysis relies on equivalent circuit models. GeoDict instead uses the same physical microstructure model for both EIS and charge/discharge simulations. This approach helps describe battery behavior more consistently, interpret experimental EIS, identify the contribution of each electrode, determine charge simulation parameters more accurately, and connect impedance characteristics to microstructure.
Battery Microstructures – Real or Digitally Generated
Microstructures for EIS simulation come from two sources:
Import 3D Experimental Images – Import data from micro‑CT, FIB‑SEM, or other tomography, then perform image processing and segmentation to obtain a digital twin of the electrode.
Direct Generation in GeoDict – Use GeoDict's material modeling tools or related GeoApps to generate 3D anodes, cathodes, or full batteries directly.
Both workflows support analysis of electrode geometry, transport properties, and electrochemical processes.
Two EIS Simulation Scales
The GeoApp supports two model scales:
Fully Resolved Microstructure Model – Preserves all material phases (active materials, electrolyte, additives, binder, separator) and computes local electrochemical behavior in detail. This approach offers high accuracy but requires more computational resources.
Homogenized P2D Newman Model – Faster computation with lower memory, suitable for parametric studies and design screening when detailed local distributions are not needed. The homogenized simulations use an enhanced P2D model with effective parameters derived from actual microstructures.
Key GeoApp Settings
The GeoApp consolidates settings into a dedicated dialog:
Double‑Layer Capacitance – Directly set capacitance for cathode and anode active materials, a key parameter for electrode‑electrolyte interface impedance.
BatteryDict Experiment Type – Select the experiment type that defines all computation parameters and conditions. Once set, the GeoApp automatically invokes BatteryDict and starts the EIS simulation.
Automated Workflow
The GeoApp integrates the entire simulation process into a unified interface:
Import or generate microstructure → Define material and electrochemical parameters → Select model scale (resolved or homogenized) → Set double‑layer capacitance → Choose BatteryDict experiment type → Auto‑start EIS simulation → Obtain result files and impedance plots.
Users can complete setup and run simulations without manually invoking underlying commands.
Comprehensive Result Files
After simulation, the GeoApp generates result files containing full EIS data, impedance response analysis, full‑cell and individual electrode impedance, and Nyquist and Bode plots – ready for further analysis, experimental comparison, or model calibration.
Nyquist and Bode Plots
Nyquist Plot – Shows real vs. imaginary parts of impedance across frequency, revealing characteristic responses.
Bode Impedance Plot – Outputs impedance modulus |Z|, real part Re(Z), and imaginary part Im(Z).
Bode Phase Angle Plot – Outputs phase angle arg(Z).
Results can be generated for the full battery and separately for anode and cathode, enabling clear identification of each electrode's contribution.
Consistent Physical Model with Charge/Discharge Simulations
A key advantage: EIS and charge/discharge simulations share the same microstructure model. Users can apply EIS to determine charge simulation parameters, compare with experimental data, analyze anode/cathode contributions, study material‑parameter effects, compare electrode designs, and link frequency‑domain impedance with time‑domain performance.
BatteryDict's BESTmicro solver supports both EIS and charge/discharge simulations on fully resolved or homogenized models.
Typical Applications
Interpretation of Experimental EIS – Use the same physical model to relate simulation features to experimental spectra.
Battery Model Parameterization – Compare simulation with experiment to determine double‑layer capacitance and other parameters, improving charge/discharge model credibility.
Anode vs. Cathode Contribution – Obtain separate impedance responses to identify the main source of full‑cell impedance.
Electrode Microstructure Optimization – Compare impedance for different pore structures, particle distributions, and material parameters.
Model Scale Selection – Choose between resolved microstructure and homogenized P2D based on research needs and computational resources.
Required GeoDict Licenses
Running the EIS GeoApp requires BatteryDict as the essential module. Depending on data source and model type, additional modules and GeoApps are often used: ImportGeo‑Vol for image import and processing; MatDict and PoroDict for material and pore analysis; GrainGeo for granular modeling; Bimodal Anode and Bimodal Cathode GeoApps for electrode generation; Generate Granular Twin (from 2D or 3D) for digital twin creation; BatteryDict‑Degradation for degradation studies; ConductoDict for conductivity; and DiffuDict for diffusion/tortuosity. The optimal combination varies with the specific application.
Summary
The EIS GeoApp computes impedance responses on either fully resolved battery microstructures or homogenized P2D Newman models, and automatically generates Nyquist and Bode plots for full cells and individual electrodes. Because EIS and charge/discharge simulations use the same physical model, users can consistently analyze impedance, interpret experiments, and calibrate charge parameters. This GeoApp provides a complete digital toolkit for battery material analysis, model calibration, and electrode optimization – connecting microstructure to electrochemical performance.
It has a Class II qualification for steel structure engineering professional contracting and a Class II qualification for general contracting of building engineering construction; the company's main products include heavy steel, light steel, trusses and purlins, color steel plates and other steel structure products; in recent years, the company has undertaken a series of projects with significant influence, including large-scale structural components, bridges, garages, and standardized factories at home and abroad; products are exported to Belarus, Zambia, Indonesia and other countries, and have been well received.
Keywords: Electrochemical Impedance Spectroscopy (EIS) GeoApp
Related Products
Product Consultation
We will contact you within one working day. Please pay attention to your email.