Product Categories

Digital Rock Physics & Digital Core Analysis

Three case studies cover reservoir twins, SCAL (drainage/imbibition/aging), and CO₂ storage, using validated solvers to predict rock parameters and reduce physical core testing.

Consultation Hotline:

Product Details

GeoDict Applications · Digital Rock Physics & Digital Core Analysis

From precise modeling of statistical digital twins for grain‑based reservoir rocks, to digital Special Core Analysis (SCAL) covering drainage, imbibition, and aging, to CO₂ storage potential assessment across structural, capillary, and mineral trapping mechanisms—these three case studies demonstrate GeoDict's comprehensive capabilities in digital rock physics and digital core analysis. Whether based on µCT‑scanned real rock structures or statistically generated digital twins, GeoDict combines high‑resolution 3D models with validated high‑performance solvers for flow, saturation, conductivity, and reactive transport. This enables reservoir engineers and geoscientists to accurately predict key parameters—capillary pressure curves, relative permeability, resistivity index—in days rather than months, significantly reducing destructive physical core testing and lengthy laboratory cycles, and providing reliable digital decision‑making for hydrocarbon exploration and CO₂ geological storage.


Case 1: Modeling Digital Twins of Grain‑Based Reservoir Rocks

Accurate digital replication of rock and pore geometry is key to accelerating R&D and production in the energy industry. This case study presents a workflow for generating statistical digital twins of grain‑based reservoir rocks, applicable to any granular sample. Researchers generated voxel‑based digital twin models of up to 600³ voxels or more, aiming to precisely reproduce rock and pore geometry. The digital twin can then be used for further non‑destructive digital measurements, reducing costs and resource consumption.

The study used Doddington sandstone from the UK Fell Sandstone Formation—a fine‑ to medium‑grained sandstone with porosity of 16%–23% and permeability of 3.7–5.4 Darcy. Researchers determined the grain size distribution and generated a statistical 3D digital twin of the rock structure. Absolute permeability was then calculated and compared for both geometries—the validation confirmed sufficient accuracy, demonstrating that this high‑performance workflow is applicable to other reservoir rock types as well.

Workflow Overview

The analysis began with µCT gray‑scale images of the Doddington sandstone. Using GeoDict's efficient tools and modules, the images were filtered, cropped, and segmented to obtain a 3D representation of the rock structure (the digital twin). Since the size of the digital twin can be freely adjusted, the method is essential for studying the dependency of physical parameters on structure size—by varying the digital twin's dimensions, size‑dependent parameters can be identified and their sensitivity to sample size classified.

For modeling, the team reproduced the standard reservoir rock modeling process, assuming the structure has a Representative Elementary Volume (REV) size. The reference rock was modeled through an iterative approach that approximates user‑defined parameters—the parameter functions and the error metric serving as the stopping criterion can both be freely adjusted. In this case, five different grain size distributions were used as function parameters to generate structures in GeoDict. The generated structure was then analyzed using the same parameter characterization as the initial structure; if the specified accuracy was not achieved, the error measurement was used to further refine the structure in the next iteration. GeoDict's built‑in structure generator and Gaussian Random Field together formed the modeling foundation, with their respective proportions automatically determined by the algorithm.

Validation

Permeability was calculated using GeoDict's LIR flow solver, which solves the Stokes equations. Permeability values were determined for both the reference structure and the digital twin under a pressure difference of 0.02 Pa, and the results were used to further improve the digital twin model. The results showed good agreement in flow velocity and deviation between the reference structure and the digital twin. Additionally, pore throat size distribution analysis was performed to incorporate geometric parameters for further validation.

What This Means for You

Modeling digital twins for specific reservoir rock types is valuable for quality control in both industry and academia. Variations in properties within the digital twin can be used to determine the sensitivity of different structural parameters relative to rock properties.

Modules used: ImportGeo‑Vol

References: [1] Andrew, M., Bijeljic, B., and Blunt, M., "Doddington Sandstone." Digital Rocks Portal, 2020; [2] Andrew, M., Bijeljic, B., and Blunt, M.J., "Pore‑scale imaging of trapped supercritical carbon dioxide in sandstones and carbonates." International Journal of Greenhouse Gas Control, 2014. Original link: Modeling Digital Twins of grain‑based Reservoir Rocks


Case 2: Digital SCAL – Capillary Pressure & Two‑Phase Flow Analysis

Digital Special Core Analysis (Digital SCAL) with GeoDict offers a faster, non‑destructive, and reproducible alternative to traditional laboratory methods. By directly simulating the flow and distribution of two‑phase fluids (e.g., oil and water) on micro‑CT or other 3D rock images, GeoDict accurately predicts capillary pressure curves, relative permeability, and hysteresis behavior—insights that are critical for reservoir characterization, production forecasting, and EOR planning. With ready‑to‑use workflows and no modifications to physical cores, Digital SCAL reduces turnaround time from months to days while preserving sample integrity. It also enables engineers to test multiple saturation scenarios, boundary conditions, and rock types.

Part 1: Simulating Hysteresis Cycles and Rock Aging

Every digital rock physics (DRP) workflow begins with segmentation of rock images and generation of the rock model. Once the 3D microstructure is established, GeoDict simulates the complete capillary pressure hysteresis cycle, capturing every key stage of two‑phase flow:

Primary Drainage: oil displaces water

Imbibition (spontaneous + forced): water spontaneously re‑enters the structure, followed by water flooding

Secondary Drainage: oil spontaneously re‑enters, followed by forced oil displacement

At each pressure step, saturation and fluid distribution within the rock are recorded in detail. A key advantage is that GeoDict incorporates wettability at the mineral level to realistically represent oil‑wet, water‑wet, or mixed‑wet scenarios. Additionally, rock aging after primary drainage can be simulated to accurately capture changes in wetting conditions. Thanks to predefined workflows and an intuitive user interface, such complex simulations can be performed quickly, transparently, and reproducibly without programming.

Part 2: Workflow Automation

GeoDict supports extensive automation of workflows. In this case study, the complete hysteresis cycle was simulated using GeoDict's built‑in Hysteresis for Oil‑Water Setups GeoApp, with simulation scenarios and input parameters freely adjustable according to specific application needs. The full range of contact angles (water‑wet, neutral, oil‑wet, mixed‑wet) can be mapped according to each rock's wetting characteristics. GeoDict is also used to simulate standard porous plate and centrifugal methods for two‑phase flow property calculation in porous media.

Part 3: Relative Permeability of Large Structures

With GeoDict's digital simulation capabilities, large rock structures can be evaluated quickly and cost‑effectively. By directly simulating capillary pressure curves and deriving relative permeability curves on high‑resolution 3D rock models, GeoDict provides an alternative to extensive laboratory testing, saving both time and resources. At each pressure step, the saturation distribution of each fluid phase is calculated in detail; based on selected saturation levels, the effective permeability of each phase is computed, enabling accurate prediction of relative permeability as a function of saturation. Throughout the workflow, users have full control over simulation parameters, ensuring transparency, reproducibility, and traceability.

Case Study: Gildehauser Sandstone

The research team simulated a complete hysteresis cycle, starting with primary drainage, followed by spontaneous and forced imbibition, accounting for the effects of partial aging of mineral surfaces after primary drainage. Corresponding relative permeabilities for both oil and water phases were calculated. GeoDict provides industry‑standard methods such as Corey and LET models to parameterize discrete simulation results into continuous functions, enabling integration into reservoir simulators and history matching workflows—bridging the gap between pore‑scale physics and field‑scale reservoir development.

Simulation Parameters

Mineral surface contact angle: initial 40°; aged mineral surface contact angle 140°

Capillary pressure curve results: irreducible water saturation 15%; residual oil saturation 42%

Computing resources: ~20 hours; ~95 GB memory; 32 parallel cores; GeoDict 2025

References: Burmester, G., Zekiri, F., Jurcic, H., Arnold, P., Ott, H., "Integration and Upscaling of Multi‑Phase Fluid Flow Properties in Clastic Reservoirs", 83rd EAGE Annual Conference & Exhibition, 2022; Arnold, P., Dragovits, M., Linden, S., Hinz, C., & Ott, H. (2023), "Forced imbibition and uncertainty modeling using the morphological method." Advances in Water Resources; Berg, S., Rücker, M., Ott, H., et al. (2016), "Connected pathway relative permeability from pore‑scale imaging of imbibition." Advances in Water Resources. Original link: Digital SCAL from 3D Rock Images


Case 3: CO₂ Storage – Structural, Capillary & Mineral Trapping

Storing CO₂ in depleted oil and gas reservoirs helps reduce atmospheric CO₂ emissions and contributes to mitigating climate change. Since the necessary infrastructure is already in place, these depleted energy reservoirs can be quickly and effectively repurposed for storage, transforming them into valuable assets that require active management throughout their lifecycle. Thorough knowledge of the reservoir is essential for quantifying its CO₂ storage potential.

GeoDict's digital rock physics capabilities enable rapid and efficient determination of key rock properties:

Capillary pressure curves (using SatuDict)

Relative permeability (using SatuDict and FlowDict)

Resistivity index (using SatuDict and ConductoDict)

Reactive flow simulation (using AddiDict, FlowDict, and MatDict)

With these digital analyses, the storage potential of depleted oil and gas reservoirs can be assessed for the following CO₂ storage mechanisms:

Structural trapping: CO₂ is contained beneath impermeable caprock

Capillary trapping: CO₂ is trapped as a residual phase in pore spaces

Mineral trapping: CO₂ reacts to form carbonate minerals

Key Advantages of GeoDict

Time savings: Digital experiments in GeoDict require only a fraction of the time of laboratory experiments

Reliability: GeoDict reliably analyzes high‑resolution core samples and rocks; its solvers have been proven to handle billions of data points quickly, accurately, and reliably

Integration: Built on extensive experience from long‑term close collaboration with customers, GeoDict provides suitable interfaces for seamless integration into existing internal workflows


Conclusion

These three case studies demonstrate how GeoDict supports the entire digital rock physics and core analysis workflow—from digital twin modeling and two‑phase flow simulation to CO₂ storage assessment. Whether you are exploring hydrocarbon reservoirs or evaluating carbon storage potential, GeoDict helps you make faster, more reliable decisions while reducing costs and preserving valuable core samples.

For more details or to request a trial, please contact our technical team.

It has a Class II qualification for steel structure engineering professional contracting and a Class II qualification for general contracting of building engineering construction; the company's main products include heavy steel, light steel, trusses and purlins, color steel plates and other steel structure products; in recent years, the company has undertaken a series of projects with significant influence, including large-scale structural components, bridges, garages, and standardized factories at home and abroad; products are exported to Belarus, Zambia, Indonesia and other countries, and have been well received.

Keywords: Digital Rock Physics & Digital Core Analysis

Related Products

Product Consultation

We will contact you within one working day. Please pay attention to your email.

%{tishi_zhanwei}%