Product Categories
Tousimis AUTOSAMDRI-815/815B Series B Automated Critical Point Dryer_Cleanroom Version
Category:
Product Details
AUTOSAMDRI-815/815B Series B Series CPD
Fully Automatic Critical Point Dryer
This series is a desktop fully automatic critical point dryer that can operate in a cleanroom, with 2 models available:
1) AUTOSAMDRI-815 Series B, for 1" wafer supercritical drying
2) AUTOSAMDRI-815B Series B, for wafers up to 4" supercritical drying
Critical Point Drying Principle
It is called Critical Point Drying (also known as Supercritical Drying) because of the continuity of states, where there is no clear distinction between the liquid and gaseous phases of the medium, and the surface tension at the interface drops to zero. This phenomenon occurs at specific temperature and pressure, known as the critical point. This zero surface tension condition can be used to dry biological samples or water-containing material samples, avoiding damage to the samples due to surface tension.
When preparing biological samples or water-containing material samples for electron microscopy (SEM/TEM), dehydration (gradient dehydration) is often required. However, the critical point of water is +374℃ and 3212 psi, which is inconvenient and prone to damaging samples. A commonly and very convenient critical point drying medium is CO2, with its critical point at +31℃ and 1072 psi. However, it does not mix easily with water, thus a third medium must be used, typically ethanol or acetone as an intermediate liquid. This way, when the transitional liquid, i.e., CO2, transitions from liquid to gas, there is no surface tension damage to the sample at the critical point.
Features and Benefits
❖ Automatic processing achieved via microprocessor controller; anti-static design, suitable for cleanroom material manufacturing applications
❖ LED indication, for clear visibility of each program mode operation
❖ Precise flow control achieved via micro-metering valve, supporting repeatable and precise flow settings.
❖ Convenient top-loading working chamber, with a viewing window to observe the internal status of the chamber
❖ Equipped with a filtration device to protect samples and valves. Internal filtration delivers filtered liquid CO 2 directly to the working chamber, with particle filtration down to 0.08µm, and a retention rate of over 99.999%.
❖ Inner surface material is resistant to liquid CO2, ultrapure ethanol, and acetone environments.
❖ Automatic critical point temperature-pressure regulation ensures system safety; preset static pressure control module automatically controls system pressure and maintains pressure stability.
❖ Rapid chamber cooling, reducing chamber temperature from room temperature to near 0℃ within 3 minutes (815B can automatically maintain temperature in FILL and PURGE modes)
❖ For 815B model, standard with filler blocks, which can reduce the chamber inner diameter to 3", 2", or 1.25", reducing CO2 waste and maximizing the efficiency of liquid CO2 usage.
❖ Each run can process 5 x 4", 5 x 3", 5 x 2", 5 x 1" diameter wafers or 5 x 10mm square dies (HF-compatible wafer/die sample holders are provided for convenient transport and handling of wafers and dies)
❖ Built-in condenser separates waste ethanol and carbon dioxide, eliminates any pipeline freezing or body static electricity, and the entire process is noiseless.
Main Technical Specifications
➢ Working chamber diameter: 1.25" I.D. @ 815 Series B; 4.5" I.D. @ 815B Series B
➢ Pressure measurement range: 0-2000 psi.
➢ Temperature measurement range: -30°C to 60°C
➢ Operation mode: Fully automatic button control
Standard Configuration
✓ Flexible braided stainless steel high-pressure hose for liquid CO2 delivery
✓ For 815B model, equipped with 3 chamber filler blocks, which can reduce the chamber inner diameter to 3", 2", or 1.25"
✓ External liquid CO2 filtration system (#8784) to remove water/oil and small particles
✓ Anti-static exhaust tube for exhaust during PURGE/VENT/BLEED and COOL operations
✓ Spare sample chamber O-rings, chamber illumination lamp, and fuses
Note: US Tousimis products have a history of nearly 50 years, and have an excellent reputation among Chinese customers. Qinsi Technology is the exclusive agent for its CPD supercritical dryers in China. Tousimis critical point dryer products are divided into two main categories: non-cleanroom versions and cleanroom versions. The former is often used for electron microscope sample preparation, while the latter is mostly used for material research in cleanrooms;
Non-cleanroom versions have 7 CPD models in total:
1) Samdri®-PVT-3D Conventional Critical Point Dryer
2) Samdri®-795 Semi-automatic Critical Point Dryer
3) Autosamdri®-815 Series A Fully Automatic Critical Point Dryer
4) Autosamdri®-815B Series A Fully Automatic Critical Point Dryer
5) Autosamdri®-931_1.25" Touchscreen Fully Automatic Critical Point Dryer
6) Autosamdri®-931_2.50" Touchscreen Fully Automatic Critical Point Dryer
7) Autosamdri®-931_3.40" Touchscreen Fully Automatic Critical Point Dryer
Cleanroom versions have 9 CPD models in total:
1) Autosamdri®-815 Series B Fully Automated Critical Point Dryer For Die & 1”Wafers
2) Autosamdri®-815B Series B Fully Automated Critical Point Dryer For 4”Wafers
3) Automegasamdri®-915B, Series B Fully Automated Critical Point Dryer For 6”Wafers
4) Autosamdri®-931_1.25" Touchscreen Fully Automated Multi-purpose Critical Point Dryer
5) Autosamdri®-931_2.50" Touchscreen Fully Automated Multi-purpose Critical Point Dryer
6) Autosamdri®-931_3.40" Touchscreen Multi-purpose Fully Automated Critical Point Dryer
7) Autosamdri®-934 Touchscreen C Series Fully Automated Critical Point Dryer For 4”Wafers
8) Automegasamdri®-936 Touchscreen C Series Fully Automated Critical Point Dryer For 6”Wafers
9) Automegasamdri®-938 Touchscreen C Series Fully Automated Critical Point Dryer For 8”Wafers
Tousimis supercritical dryers from the United States are widely used for critical point drying of biological samples, gels, and other fragile and complex samples with micro-nano 3D structures, as well as materials such as MEMS, MOFs, carbon nanotubes, graphene, and semiconductor wafers (maximum sample size 8 inches, 5 pieces can be dried simultaneously). Utilizing the principle of CO2's critical point state, which eliminates liquid-phase surface tension that causes sample shrinkage and deformation, it obtains dried samples with true morphology. This is an effective method for drying and preparing samples of hydrated or other liquid-containing biological samples such as cells and tissues, and semiconductor materials; it features easy operation, precise control, and repeatable results. Customers can choose different models based on different applications.
It has a Class II qualification for steel structure engineering professional contracting and a Class II qualification for general contracting of building engineering construction; the company's main products include heavy steel, light steel, trusses and purlins, color steel plates and other steel structure products; in recent years, the company has undertaken a series of projects with significant influence, including large-scale structural components, bridges, garages, and standardized factories at home and abroad; products are exported to Belarus, Zambia, Indonesia and other countries, and have been well received.
Keywords: Tousimis AUTOSAMDRI-815/815B Series B Automated Critical Point Dryer_Cleanroom Version
Related Products
Product Consultation
We will contact you within one working day. Please pay attention to your email.