Product Categories
American Tousimis Autosamdri-931 cleanroom version touchscreen fully automatic critical point dryer
Category:
Product Details
US Tousimis Autosamdri-931 Cleanroom Series
Touchscreen Fully Automatic Critical Point Dryer
This series is a benchtop critical point dryer, suitable for cleanroom operation, with 3 models available:
1) Autosamdri-931_1.25", for 1" wafer critical point drying
2) Autosamdri-931_2.50", for critical point drying of wafers no larger than 2"
3) Autosamdri-931_3.40", for critical point drying of wafers no larger than 3"
Principle of Critical Point Drying
It is called critical point drying (also known as supercritical drying) because of the continuity of states, meaning there is no clear distinction between the liquid and gaseous phases of the medium, and the surface tension at the interface drops to zero. This phenomenon occurs at specific temperature and pressure, known as the critical point. The zero surface tension condition can be used to dry biological samples or water-containing material samples, avoiding damage to the sample caused by surface tension.
When preparing biological samples or water-containing material samples for electron microscopy (scanning electron microscopy and transmission electron microscopy), dehydration (gradient dehydration) is often required. However, the critical point of water is +374°C and 3212 psi, which is inconvenient and prone to damaging the sample. Typically, a very convenient critical point drying medium is CO2, with its critical point at +31°C and 1072 psi. However, it does not mix easily with water, so a third medium must be used, usually ethanol or acetone as an intermediate liquid. This way, when the transitional liquid, i.e., CO2, transitions from liquid to gas, there is no surface tension damage to the sample at the critical point.
Features and Benefits
❖ Anti-static design suitable for cleanroom material manufacturing applications
❖ Bright touchscreen control
❖ Default "Auto Mode" setting, suitable for most wafer and die MEMS applications
❖ Can process up to 5 substrates (wafers or dies) at a time
❖ Create and store user-defined programs for different samples
❖ "Slow fill" function protects most fragile samples
❖ Rapid cooling chamber (cools from 25°C to 3°C in 1 to 3 minutes)
❖ Uses maintenance-free vortex stirring for exchange and agitation, no stirring rod required
❖ Externally replaceable 0.5µm post-exchange filter for easy maintenance
❖ Equipped with fluoride-resistant sample holders, with optional chambers for drying 3" and 2" diameter wafers or 10mm square dies respectively
❖ For liquid CO2 supplied from external cylinders 2 for particle filtration, with retention rate over 99.5%
❖ Internal filtration can directly deliver filtered liquid CO2 2 directly to the working chamber, with particle filtration down to 0.08µm and retention rate over 99.999%
❖ Built-in condenser to separate waste ethanol and carbon dioxide, eliminating any pipeline freezing or body static, and the entire process is noiseless
❖ "Stasis software", for drying gels and other complex samples
Main Technical Specifications
➢ Working chamber dimensions: Three chamber diameters available: 1.25", 2.50", 3.40"
➢ Pressure measurement range: 0-2000 psi.
➢ Temperature measurement range: -30°C to 60°C
➢ Control method: Touchscreen fully automatic program control
Standard Configuration
✓ Flexible high-pressure liquid CO2 supply hose for easy on-site installation
✓ Liquid CO2 system delivery filtration
✓ Fluoride-resistant sample holders: for drying 3" and 2" wafers or 10mm square dies, based on different chamber sizes
✓ Flexible exhaust pipe for easy installation
✓ Spare chamber O-rings, chamber lamp, and fuses
Note: Tousimis products from the US have a history of nearly 50 years and have an excellent reputation among Chinese customers. Qinsi Technology is its exclusive distributor in China for CPD supercritical dryers. Tousimis critical point dryer products are divided into two main categories: non-cleanroom versions and cleanroom versions. The former is often used for electron microscope sample preparation, while the latter is mostly used for material research in cleanrooms;
Non-cleanroom versions have 7 CPD models:
1) Samdri®-PVT-3D Standard Critical Point Dryer
2) Samdri®-795 Semi-Automatic Critical Point Dryer
3) Autosamdri®-815 Series A Fully Automatic Critical Point Dryer
4) Autosamdri®-815B Series A Fully Automatic Critical Point Dryer
5) Autosamdri®-931_1.25" Touchscreen Fully Automatic Critical Point Dryer
6) Autosamdri®-931_2.50" Touchscreen Fully Automatic Critical Point Dryer
7) Autosamdri®-931_3.40" Touchscreen Fully Automatic Critical Point Dryer
Cleanroom versions have 9 CPD models:
1) Autosamdri®-815 Series B Fully Automatic Critical Point Dryer For Die & 1” Wafers
2) Autosamdri®-815B Series B Fully Automated Critical Point Dryer For 4” Wafers
3) Automegasamdri®-915B, Series B Fully Automated Critical Point Dryer For 6” Wafers
4) Autosamdri®-931_1.25" Touchscreen Fully Automated Multipurpose Critical Point Dryer
5) Autosamdri®-931_2.50" Touchscreen Fully Automated Multipurpose Critical Point Dryer
6) Autosamdri®-931_3.40" Touchscreen Multipurpose Fully Automated Critical Point Dryer
7) Autosamdri®-934 Touchscreen C Series Fully Automated Critical Point Dryer
8) Automegasamdri®-936 Touchscreen C Series Fully Automated Critical Point Dryer
9) Automegasamdri®-938 Touchscreen C Series Fully Automated Critical Point Dryer
Tousimis critical point dryers from the United States are widely used for critical point drying of biological samples, gels, and other fragile and complex samples with micro-nano 3D structures, as well as materials such as MEMS, MOFs, carbon nanotubes, graphene, and semiconductor wafers (maximum sample size 8 inches, 5 pieces can be dried simultaneously). Using the principle of CO2 critical point state without liquid phase surface tension causing sample shrinkage and deformation to obtain dried samples with true morphology, it is an effective method for drying and preparing samples of biological samples such as cells and tissues containing water or other liquids, and material samples such as semiconductors; it features simple operation, precise control, and repeatable results. Customers can choose different models based on different applications.
It has a Class II qualification for steel structure engineering professional contracting and a Class II qualification for general contracting of building engineering construction; the company's main products include heavy steel, light steel, trusses and purlins, color steel plates and other steel structure products; in recent years, the company has undertaken a series of projects with significant influence, including large-scale structural components, bridges, garages, and standardized factories at home and abroad; products are exported to Belarus, Zambia, Indonesia and other countries, and have been well received.
Keywords: American Tousimis Autosamdri-931 cleanroom version touchscreen fully automatic critical point dryer
Related Products
Product Consultation
We will contact you within one working day. Please pay attention to your email.