SEM Peltier stage system for in-situ heating & cooling
Standard SEM Coolstage -25°C to +50°C
With increased use of Low Vacuum or Variable Pressure microscopes, many microscopists now appreciate the need to control water sublimation from wet samples. By cooling a wet specimen, water sublimation may be slowed or depending on chamber pressure stopped altogether. Saturated vapour pressure of water decreases considerably with temperature.
At room temperature water will very quickly sublimate causing considerable changes to the specimen structure. At 300Pa, specimen temperature needs to be less than -9.5°C and at 85Pa specimen temperature needs to be less than -25°C to stop sublimation. Therefore by cooling a specimen to -25°C, chamber pressure may be 85Pa with limited sublimation from the specimen. Advantages of this procedure are clear to see, by cooling a specimen in low vacuum, changes in specimen structure due to sublimation can be minimised and the ability to operate at higher vacuum provides a better signal to noise ratio and clearer images. With ESEM SEMs where imaging is possible in a gaseous environment temperature and vacuum can be perfectly matched to keep the specimen fully hydrated during imaging.
The Deben Coolstage can also be used for high vacuum heating and cooling applications inside the SEM.
The Deben Coolstage is available for all SEMs and guaranteed temperature range is +50°C to -25°C (at 300Pa chamber pressure) or less than -30°C at higher vacuums.
Enhanced Coolstage -25°C to +160°C
The Enhanced Coolstage provides the same features as the standard Coolstage but with an extended temperature range from -25°C to +160°C.
The Enhanced Coolstage can also be used for high vacuum heating and cooling applications inside the SEM.
The Enhanced Coolstage is available for all SEMs and guaranteed temperature range is +160°C to -25°C (at 300Pa chamber pressure) or less than -30°C at high vacuum.
ULTRA Coolstage -50°C to +50°C
The Ultra Coolstage provides the same features as the standard Coolstage but with an extended temperature range from -50°C to +50°C at high vacuum.
The Ultra Coolstage can also be used for high vacuum heating and cooling applications inside the SEM.
The Enhanced Coolstage is available for all SEMs and guaranteed temperature range is +50°C to -45°C (at 300Pa chamber pressure) or less than -50°C at high vacuum.
Related products
SEM chamberscope
These products are for Research Use Only.
Nanjing Tansi Technology Co.,Ltd.
TEL: 025-85432178, 025-85432278
FAX:025-83353938
ZIP: 210009
ADD:2-728b, Hongqiao center, new City Plaza, 281 Zhongshan North Road, Nanjing
E-mail:sales@tansi.com.cn
Tansi Beijing Office
TEL: 010-62908712
FAX:025-83353938
ZIP: 100085
ADD:No.15, information road, Haidian District, Beijing
E-mail:sales@tansi.com.cn
© 2019 tansi.com.cn Copyright 苏ICP备05020058号